Tips for the Use of Rotary Cylinders
Release time:
2025-12-07
Tips for the Use of CROVIT Rotary Cylinders
Tips for the Use of Rotary Cylinders
|
|
① Install a fixed bracket | ① After connecting the oil pipe, the rotary cylinder must be vertically downward and not tilted or angled. Use a fixed bracket to secure it. |
② Keep the runout of the rotary cylinder adaptor within 0.01mm.
| ② Do not connect the oil return pipe to a thin tube or hose. Use one with iron wire inside to prevent deformation. |
③ After installing the rotary cylinder, keep the runout of the cylinder body within 0.02mm. | ③ The oil pipe cannot accumulate oil, and no back pressure can be generated |
④ Clean the inside of the oil pipe and the bottom of the hydraulic station before installation. Install a filter on the oil inlet line to prevent dirt from entering the cylinder | ④ The oil return pipe must be above the oil in the hydraulic station. |
⑤ Before testing the machine, do not start the rotary cylinder directly. Use the switch to test whether the chuck is working ( clamp and loosen). Run the spindle at an appropriate low speed first and check whether all are normal. Then slowly adjust it to the required speed. |
Latest News
CONTACT US
WhatsApp / Mobile: +86-159-67056767
Tel: +86-576-89932067
Add: Building 8, Wanyang Crowd Innovation Park, Wenling, Zhejiang, China
GET A FREE QUOTE
FOLLOW US
Copyright © 2024 Magrab Machinery (Taizhou) Co., Ltd. ALL Rights Reserve.